Contact
Trailers / Heavy Duty Deckover (FS)

Heavy Duty Deckover (FS)

12" 19lb I-BEAM FRAME
WIDE LOAD NO FENDERS
CARGO TIE DOWNS
Overview
Overview
Specs
Payload
Options
PDF
Find a Dealer

Heavy Duty Deckover

Arctic Wire Harness
All our wire harnesses are sealed and the front hook up is rated for -65°F.
Pressure Treated Pine Floor
All our lumber is made and installed to withstand weather.
Premium Components
We use brand name quality products for anything we don't produce in house.
3 Year Structural Warranty
All our frames are built tough and we back them up with a 3 year warranty.
Premium Powder Coat
We metal blast and apply a super durable powder coat.

Heavy Duty Deckover Trailer

01
Need to haul bulk material or equipment without having fenders to get in the way? This deckover was designed for you.
02
This model (in the 14k and 16k GVWR) is popular with the non-CDL hotshot industry. A minimum of a 3/4 ton tow vehicle is required, and a 1 ton is highly recommended for the 21k GVWR (triple axle model).
03
The FS model is standard as a gooseneck, but can be built as a bumperpull. Whether you select a straight deck with slide ramps, or the 5' dove and full width rhino ramps, you end up with a great amount of deck space to make hauling loads a breeze.
04
Need to step up to a higher GVWR? Check out the FD model!

Full specs & options

14K Sizes & Payload
Size - Weight - Payload
  • 102" x 25' - 5,020 lbs - 8,980 lbs
  • 102" x 30' - 5,480 lbs - 8,520 lbs
  • 102" x 36' - 6,500 lbs - 7,500 lbs
  • 102" x 40' - 7,800 lbs - 6,200 lbs
16K Sizes & Payload
Size - Weight - Payload
  • 102" x 18' - 4,975 lbs - 11,025 lbs
  • 102" x 20' - 5,090 lbs - 10,910 lbs
  • 102" x 22' - 5,200 lbs - 10,800 lbs
  • 102" x 25' - 5,170 lbs - 10,830 lbs
  • 102" x 30' - 5,630 lbs - 10,370 lbs
  • 102" x 36' - 7,150 lbs - 8,850 lbs
  • 102" x 40' - 8,020 lbs - 7,980 lbs
21K Sizes & Payload
Size - Weight - Payload
  • 102" x 25' - 5,590 lbs - 15,410 lbs
  • 102" x 30' - 6,370 lbs - 14,630 lbs
  • 102" x 36' - 7,070 lbs - 13,930 lbs
  • 102" x 40' - 8,370 lbs - 12,630 lbs
Brakes & Suspension
Standard
  • Varies by GVWR
  • 7K Easy Lube Electric Brake Spring Axles (14K & 21K GVWR)
  • 8K Electric Brake Oil Bath Spring Axles (16K GVWR)
Options to Exchange or Add On
  • 7K Electric Brake Oil Bath Spring Axles (14K & 21K GVWR)
  • 7K Easy Lube Electric Brake 22.5° Down Torsion Axles (14K & 21K GVWR)
  • 8K Electric Brake Oil Bath 22.5° Down Torsion Axles (16K GVWR)
Tires
Standard
  • Varies by GVWR
  • 235/80 R16 (E) 10Ply Tires (14K GVWR)
  • 215/75 R17.5 (H) 16Ply Tires (16K GVWR)
  • Spare Tire
Options to Exchange or Add On
  • 235/85 R16 (G) 14Ply Tires
  • 215/75 R17.5 (H) 16Ply Tires
Frame
Standard
  • Straight Deck
  • Torque Tube (Standard on 36'+)
  • Under-Frame Bridge (Standard on 30'+)
  • 12" 14 lb I-Beam Frame (Standard on 25'-30')
  • 12" 19 lb I-Beam Frame (Standard on 36'+)
  • 16" Spaced Crossmembers
  • Treated Yellow Pine Floor
Options to Exchange or Add On
  • 5' Dove Tail with Rhino Ramps
  • Low-Profile Pierced-Beam
  • 8' Deck Over Neck
  • 12" Spaced Crossmembers
  • 11 Gauge Diamond Plate Floor
  • Oak Floor
Hitch
Standard
  • 2-5/16" 25K Gooseneck Coupler
Options to Exchange or Add On
  • 2-5/16" 30K Gooseneck Adjustable Topwind Square Coupler
  • 4" Raised Neck & Coupler (ideal for lifted trucks)
  • 10" Raised Neck & Coupler (ideal for lifted trucks)
  • 2-5/16" 25K Adjustable 4-Bolt Plate Coupler (Bumper Pull)
Jack
Standard
  • Dual 10K Drop-Leg Jacks
Options to Exchange or Add On
  • Dual 10K 2-Speed Jacks
  • Dual 10K Hydraulic Jacks
  • Dual 25K 2-Speed Jost Jacks
Cargo Loading
Standard
  • Front Tool Box
  • Rub Rail
  • Standard Stake Pockets
  • Pair Of Slide-In Ramps
  • Side Step On Both Sides
Options to Exchange or Add On
  • 4' Side Mount Tool Box
  • Weld On D-Rings
  • Flush Mount D-Rings (Steel Floor Only)
  • Flush Mount Swivel D-Rings (Steel Floor Only)
  • Weld On Strap Winches
  • Sliding Strap Track & Winches
  • Lockable Chain Rack
  • Winch Plate
  • 12,500lb Warrior Winch
  • Receiver Hitch & Plug
  • Pair Of Rhino Ramps
Electrical
Standard
  • Led Lights
  • Weather Resistant Harness (-65°F)
  • Pair Of Side Turn Flashers (Standard on 30'+)
Options to Exchange or Add On
  • Solar Charger
Loading Angles
Standard
  • Straight Deck with 96" Slide In Ramps - 21°
Options to Exchange or Add On
  • 5' Dove with Rhino Ramps - 17°
Color
Standard
  • Lamar Charcoal Gray Powder Coat
Options to Exchange or Add On
  • None Available

Have a Question?

01

"How often do I need to torque my lug nuts?"

After 50 miles, you need to check your lug nuts and torque them to the right specs.
02

"How should I load my trailer?"

Keeping your trailer load properly distributed is very important. Always load heavier towards the tongue. At least 60% of your payload must be forward of the trailer center, with lighter items on the top and rear. Secure everything with proper tie downs.
03

"What kind of warranty do Lamar trailers come with?"

We have a three-year frame warranty and a one-year component warranty. Tire warranty is handled by our tire manufacturer; check the sticker on the front of your trailer for contact information.
04

"What is the payload on Lamar Trailers?"

We have all our weights and payloads listed. Check out individual products here on our website to see details on the trailer you're interested in.
05

"I'm having trouble with my trailer! What should I do?"

Warranty claims are handled through our dealers. They are able to look at any issues firsthand and have them fixed in-house or outsourced by local reputable businesses. Bring your trailer into your local Lamar dealer. If this is not an option, you can email us directly with your VIN, pictures, and a description of the issue at warranty@lamartrailers.com. Any unauthorized work will not be reimbursed.
06

"What is causing my trailer's tire wear?"

Tire wear should be checked frequently. Once a tire wear pattern is established, stopping becomes difficult, even when the underlying cause is corrected. Tire pressure should always be in accordance with the manufacturer's recommended pressure rating for any given load.

1. Always check tire pressure cold before operation.

2. Do not bleed air from tires when they are hot.
07

"I scratched my trailer, where can I get touch up paint?"

Our charcoal gray color is a close match to the Rustoleum Gloss Charcoal rattle can available at most hardware stores.
08

"My hydraulic reservoir is flooding; how can I fix it?"

Typically, an overflowing reservoir is caused by a low battery.

On a low battery, the cylinder will push air instead of fluid into the cylinder, causing the fluid to be pushed out into the reservoir.

Charge the battery on your dump or tilt trailer or replace it and cycle the dump up and down to see if the oil will go down.
09

"Where is my trailer VIN on my Lamar Trailer?"

Your VIN sticker is usually located on the inside of your trailer tongue.
10

"How do I grease my trailers axles?"

If your trailer has grease axles, we recommend re-greasing them once a year or every 12,000–36,000 miles. Jack up the trailer, remove the hub grommet, and use a manual grease gun on the grease zerk (pneumatic guns can damage seals). Slowly spin the wheel while adding grease until new grease appears, then stop. Wipe off the excess, replace the grommet, and repeat on all axles.
11

"What hydraulic fluid do I need for my trailer's hydraulic pump?"

If you are looking to fill up or replace the hydraulic fluid in the hydraulic pump on your Lamar trailer, you should replace it with AW-32.

You can find AW-32 Fluid at any local trailer dealership, Home Depot, Lowes, or local parts stores like Advanced Auto Parts, O'Reillys, or Auto Zone.

learn more

Experience the Lamar Difference: At Lamar, we believe buying and owning a trailer should be simple.
Download PDF